BYSNM - PLUMBERS HEAT PRUF GREASE, GR-1

  • MSDS: BYSNM
  • Manufacturer: RADIATOR SPECIALTY CO
  • Product Name: PLUMBERS HEAT PRUF GREASE, GR-1
  • National Stock Number: 9150-00N000302
Product Identification

Product ID:PLUMBERS HEAT PRUF GREASE, GR-1
MSDS Date:04/01/1992
FSC:9150
NIIN:00N000302
MSDS Number: BYSNM

Responsible Party
RADIATOR SPECIALTY CO
1400 W INDEPENDENCE BLVD
CHARLOTTE, NC 28208
US

Emergency Phone: 704-377-6555

Info Phone: 704-377-6555

Preparer: I. LIEBMAN

Cage: 77628

Contractor
RADIATOR SPECIALTY COMPANY
34689 CHARLOTTE, NC 28208 US

Telephone: 704-377-6555/303-623-5716

Cage: 77628

Ingredients

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE),

CAS: 64742-52-5

RTECS: PY8035001

Fraction By Weight: <75%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT: MILD IRRITANT. SKIN
CONTACT: MILD IRRITANT ON PROLONGED EXPOSURE. INHALATION: NOT
LIKELY (GREASE). INGESTION: NOT LIKELY (GREASE). HARMFUL IF
SWALLOWED!
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. IF ADVERSE
EFFECTS PERSIST, CONSULT MD IMMEDIATELY. SKIN: WASH WITH SOAP AND
WATER. IF INJECTED UNDER THE SKIN (HIGH PRESSURE), TREAT AS MEDICAL
EMERGEN CY. INHALATION: MOVE TO FRESH AIR. INGESTION: DO NOT INDUCE
VOMITING! CONSULT MD IMMEDIATELY. DO NOT ADMINISTER ADRENALIN OR
EPINEPHRINE!

Fire Fighting

Flash Point Method:COC
Flash Point:380F,193C
Extinguishing Media:WATER FOG, FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . COOL CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:OBSERVING HEALTH HAZARDS, REMOVE IGNITION
SOURCE. SOAK UP WITH ABSORBENT CLAY AND TRANSFER TO WASTE DRUM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL PLACE AWAY FROM IGNITION
SOURCE, OXIDIZING AGENTS.
Other Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN USE. KEEP AWAY
FROM CHILDREN AND ANIMALS!

Exposure Controls

Respiratory Protection:NOT APPLICABLE. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:USE WITH ADEQUATE LOCAL VENTILATION.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:<500F,<260C
Spec Gravity:1.0 (H*2O=1)
pH:6-7
Solubility in Water:INSOLUBLE
Appearance and Odor:BROWN GREASE WITH PETROLEUM-LIKE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FIRE: NORMAL PRODUCTS OF COMBUSTION:
CARBON MONOXIDE, CARBON DIOXIDE AND SMOKE.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH APPLICABLE
FEDERAL, STATE AND LOCAL GOVERNMENT LAWS AND REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.